Power : AC220V 50HZ <=1A
Volume : 3.5L
Circulated operating time: working 5--8 Min; Stop 60-120 Min
Ink temp.: 26-38
Start to use :
1. Clean the inner part of the tank with solvent . Avoild liquid flow into the bottom part of the tank .
2. Pour the ink into the tank and screw up the cover tightly . Please keep the ink level between "Min." and "Max" .
3. Unscrew the Ink tube port and put the ink tube from the printer into the tank and screw up the Ink tube port tightly . The end of the tube should be lower than "Min." level.
4. Plug on the power cable and switch on . It will running automatically .
5. When the printer does not work , please switch it off .
Caution :
1. No liquid flow into the bottom of the tank .
2. The end of the tube should be lower or equal to the"Min." .
the ink level shouldbetween "Min"and "Max." Running the tank when ink level lower than "Min." is prohibited .
3. Please do not open the bottom of the tank without professional staff's permit .
